The front fl oor frame is made up of
three pieces. The side floor frames
and the rear floor frame are made
up of two pieces. The holes in these
pieces will align when the pieces are
positioned with correct amount of
overlap. The illustrations below show
the proper overall length for the sides,
rear and front. Proceed as follows:
1
Place the front floor frames as
shown. Center the ramp, with drain
holes facing outside, on top of the two
front fl oor frames. Join the frames by
inserting eight screws.
2
Overlap the side floor frames
and the rear fl oor frames as shown.
The holes in these pieces will align
when the pieces are positioned with
correct amount of overlap. See the
illustrations below for the proper
overall length of the side and rear
fl oor frames. Join the frames by in-
serting fi ve bolts into each frame set
as shown.
3
Double check the length of each
and set these pieces aside for later
use.
Step 1
K14
Parts Needed For
Floor Frame Assemblies
8934 Ramp (1)
9367 Front Floor Frame (2)
8936 Rear Floor Frame (2)
8945 Side Floor Frame (4)
9367
STEP
1
8934
9367
DRAIN HOLES FACE
OUTSIDE
Front Floor
Frame Assembly
119 3/8" 303,2 cm
8936
8945
9367
8934
9367
8945
8945
Side Floor Frame 103 3/8" 262,6 cm
8936
8936
Rear Floor Frame
119 3/8" 303,2 cm
STEP
2
STEP
3
103 3/8" 262,6 cm
103 3/8" 262,6 cm
119 3/8" 303,2 cm
Front & Rear
119 3/8" 303,2 cm
Side
14
