23
The gables go on top of the front and
rear walls to support the roof beams.
1
Apply green edge trim to the top
edge of the large left gables, small
left gables, large right gables and
small right gables, cut to length.
2
Apply clear edge trim to the edge
of the large left gables and the large
right gables, cut to length.
3
Join the large gables to the small
gables on the left and right sides us-
ing four bolts, washers and nuts on
each side. This part of the gable is
called the outer gable leg.
4
Attach the four roof beam
brackets to the outer gable legs using
two bolts in the two bottom holes of
each bracket.
5
Attach the four mid gable braces
to the gables using three bolts, wash-
ers and nuts.
Parts Needed For
Gable Assemblies
Step 10
ZS23
7858 Large Right Gable (2)
7859 Large Left Gable (2)
6114 Small Right Gable (2)
6115 Small Left Gable (2)
6085 Roof Beam Bracket (4)
7860 Mid Gable Brace (4)
6085
Roof Beam Brackets
7859
STEP
3
STEP
5
To avoid mishap on the sharp
edge the edge trim must remain
in place on the top edge of the
gable until right and left roof pan-
els are in place.
NOTE
The gables are packed nested
together and might be mistaken
as one piece. Carefully separate
them before continuing.
NOTE
Mounting leg of brace must face
toward center of gable
CAUTION:
69835 Green Edge Trim
(Plastic Piece)
69835 Green Edge Trim
(Plastic Piece)
6115
7859
STEP
1
STEP
Washer
FRONT
67521 Edge Trim
(Plastic Piece)
STEP
4
2
6115
7860
7858
6114
