1
Position right & left corner posts
at the corners of the fl oor frame as
shown. The angled end of each post
must be placed on top for all four
corners. Fasten the corner post to
the fl oor frame with two screws.
Support the corner posts with stakes
until top frames are attached.
2
Fasten the door track assembly
(holes on top) behind the top of the
front corner posts using screws. See
the fi gure.
3
Fasten the rear wall angle as-
sembly behind the top of the rear
posts using screws.
8716 Right Corner Post (2)
8715 Left Corner Post (2)
Door Track Assembly (1)
Side Wall Angle Assembly (2)
Rear Wall Angle Assembly (1)
Step 6
M19
Parts Needed For
Posts/Top Frames
NOTE
The remainder of the building assembly
requires many hours and more than one
person. Do not continue beyond this
point if you do not have enough time to
complete the assembly today. A partially
assembled building can be severely
damaged by light winds.
The top frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which sup-
port the roof.
4
Fasten the side wall angle as-
semblies behind the top of the side
posts using screws. Side wall angles
overlap rear wall angle in corners.
The fl oor frame must be square
and level or holes will not align.
STEP
1
8716
8740
5986
8715
REAR
FRONT
8716
SIDE
TOP VIEW
8715
STEP
3
STEP
2
9366
FRONT
Short Leg
on Bottom
Wall Angles
Must Face
Inside
Building
8740
SIDE
Opening
Facing In
Long Leg
on Top
STEP
4
Door T
rack
Assembly
19
