background image

Owner's Manual & Assembly Instructions

722890817

Model No.     697.76092  A       WH109  A       

          WH109EU 

 

A

                                                 Exterior Dimensions                        Interior Dimensions                     Door

       *Approx.                Base                     (Roof Edge to Roof Edge)                         (Wall to Wall)                        Opening

           Size                    Size                     Width       Depth       Height             Width        Depth       Height       Width     Height     

        10' x 9'              121" x 105"              123 1/4"    107 1/2"     87 7/8"            118 1/4"     102 1/4"     86 5/8"      55 1/2"       60"       

  Storage Area:    84 Sq. Ft. 

553 Cu. Ft.

 

                  7,8 m

2

           15,7 m

3

 

 

BUILDING DIMENSIONS  

* Size rounded off to the nearest foot

3,0 m x 2,6 m    307,3 cm x 266,7 cm      313,1 cm     273,1 cm     223,2 cm           300,4 cm      259,7 cm     220,0 cm    141,0 cm   152,4 cm

CAUTION: SOME PARTS HAVE SHARP EDGES. CARE

MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES

TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ

SAFETY INFORMATION PROVIDED IN THIS MANUAL

BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES

WHEN HANDLING METAL PARTS.

Missing Parts, Questions on Assembly?

Call:  1-800-851-1085 or 

[email protected]

Do not return to dealer, they are not 

equipped to handle your requests.

 

AI01

Summary of Contents for 697.76092

































Reviews: