The Fixture Menu of the SkyPanel
32
Stand-Alone Lighting Effects (only SkyPanel-C)
• Press the MENU button (10) to open the fixture menu.
• Turn I/S, until „Lighting Effects“ is displayed. Press I/S twice
to open the menu.
• „Party Effects“ activates a stand-alone demo sequence, „Off“
de-activates the demo sequence.
The demo sequence calls up the color spectrum or changes
the color temperature from warm to cold and vice versa in an
endless loop. Set the intensity with I/S. Set the speed with the
central rotary knob from 0-100% (60 s - 1 s). The right rotary
knob sets the saturation and changes between color and color
temperature sequence. With the right rotary knob at „0“ the col-
or temperature loop is active. Turn the right rotary knob clock-
wise to increase the saturation to 100%.
To set the Display Behavior
• Press the MENU button (10) to open the fixture menu.
• Turn I/S, until „Display Setup“ is displayed. Press I/S to open
the menu.
• Turn I/S, until „Display Illumination“ is displayed. Press I/S to
open the menu. Select the desired setting by turning I/S.
Press I/S to confirm the setting.
• Turn I/S, until „Display Brightness“ is displayed. Press I/S to
open the menu. Select the desired brightness by turning I/S.
Press I/S to confirm the setting.
• Turn I/S, until „Display Contrast“ is displayed. Press I/S to
open the menu. Select the desired contrast by turning I/S.
Press I/S to confirm the setting.
• Turn I/S, until „Display Rotation“ is displayed. Press I/S to
open the menu. Select the desired setting by turning I/S.
Press I/S to confirm the setting.
• Turn I/S, until „Error Mode Display“ is displayed. Press I/S to
open the menu. Select the desired setting by turning I/S.
Press I/S to confirm the setting.
Please refer to section „ “Fixture Menu” on page 38 for a de-
tailed explanation of the options.
To save and load a Preset List
Note: Disconnect all DMX cables from the product before using
an USB memory stick. The data transfer between the product
and the USB memory stick might be disturbed due to interfer-
ences.
The fixtures preset list can be saved to an USB memory stick
and uploaded to another SkyPanel.
To save a preset list:
• Connect an USB memory stick to the USB-A connector of the
SkyPanel.
• Press the MENU button (10) to open the fixture menu.
• Turn I/S, until „USB Functions“ is selected. Press I/S to open
the menu.
• Turn I/S, until „Save Light Presets“ is selected. Press I/S to
open the menu.
