Safety Infor
m
ation
11
Specific Safety Information
Not to observe the safety information or general rules
of reason may cause injury or death to yourself and
others or damage to equipment.
Intensive use can cause the surface to become
warm. Let the product cool down complete before you
handle it.
Never cover air vents during operation. Keep a mini-
mum clearance around the product of 0.5 m (1.65 ft.).
WARNING: Intense light. Never look direct into the
light source.
The product must not be used without a diffuser
installed. Products with defective safety switches
(SkyPanel RP) must not be used.
Never point a light beam from another luminaire into
the diffuser. Do not place the product on or nearby
heat sources. Intense heat cause damage to the
product or automatic power off during operation.
The stirrup shipped with the product must be
mounted hanging or standing vertically. Lateral load
can cause deformation or breaking of the spigot and
the stirrup.
Devices and accessories must be secured against fall
when mounted above floor level. Always observe
common and local safety regulations.
Never use the cables for transportation. Never hang
the product on its cables. Do not hang a battery pack
on its connection cable to the product.
Always check that the local AC power matches the
voltage and frequency range printed on the type label
of the product before use. Never use the product
when the AC power does not match.
When using a battery pack, always check that the
voltage matches the voltage range printed on the type
label of the product before connecting the battery
pack to the product.
Never connect the product to a dimmer-system or a
dimmer-channel in non-dim mode. To do so will dam-
age the electronics. Damages caused by connecting
the product to a not suitable power source are not
covered by the warranty.
CAUTION: High voltage! Danger of life! Always dis-
connect the product complete from mains voltage
before you connect or disconnect a cable.
