The Fixture Menu of the SkyPanel
31
• Select the DMX mode by turning I/S. Press I/S to confirm the
setting.
• The menu „DMX Protocol“ closes automatically. Press the
MENU button to force closing the menu.
To set the DMX-Signal-Loss Behavior
• Press the MENU button (10) to open the fixture menu.
• Turn I/S, until „DMX Settings“ is displayed. Press I/S to open
the menu.
• Turn I/S, until „DMX Loss Behavior“ is displayed. Press I/S to
open the menu.
• Select the setting by turning I/S. Press I/S to confirm the set-
ting.
• The menu „DMX Loss Behavior“ closes automatically. Press
the MENU button to force closing the menu.
To set the fan Mode
• Press the MENU button (10) to open the fixture menu.
• Turn I/S, until „Fan Mode“ is displayed. Press I/S to open the
menu.
• Select the Fan mode by turning I/S. Press I/S to confirm the
setting.
• The menu „Fan Mode“ closes automatically. Press the MENU
button to force closing the menu.
Option
Description
Hold Last Command
The last received DMX values are used
until the fixture is switched off or valid
DMX data is received again.
Blackout
The fixtures douses to 0% intensity
immediately.
Hold for 2 min. then
fade out
The last received DMX values are used
for 2 minutes. After 2 minutes the fixture
douses to 0% intensity. When valid DMX
data is received after less than 2 min-
utes, these data will be used.
Fan mode
Description
Low Fan Speed
Fan operates constantly at low speed (silent).
Vari Fan Speed
The temperature of the light engine controls
the fan speed. The fan starts running at app.
70% brightness.
High Fan Speed
Use this mode for ambient temperatures up
to 45° C / 113° F. The fan runs at maximum
speed.
