6
Como Usar Su Aparato
7. Conecte el cord
n elØctrico en el tomacorriente si estÆ usando el
motor elØctrico.
8.Llene la cubeta de madera con una capa de hielo (6 tazas
aproximadamente). Asegœrese que el hielo que usted ponga en la
cubeta estØ quebrado en piezas pequeæas y gruesas. Tal vez
necesite usar un mazo o un martillo para romper el hielo en pedazos
pequeæos y gruesos. Para cada bote del helado, se espera usar 1 o
2
bolsas medianas de hielo.
9.Agregue una capa de sal de piedra encima del hielo (1/4 taza
aproximadamente).
10.
Repite los tramites 10 y 11 hasta que el hielo y sal llegue al nivel
del agujero de drenaje.
11. Agregue agua fr
o a la cubeta hasta que el parte superior del agua se
iguale con el agujero de drenaje.
12.
Conforme el hielo se derrita de 2 a 3 pulgadas, agregue mÆs
hielo y sal de piedra.
13.
Gire la manivela o ponga a funcionar el motor. Mientras el bote
dØ vueltas, revuelva y mezcle juntos la sal y el hielo. Utilice el
agitador de plÆstico cada 10
15 minutos, o mÆs a menudo si es
necesario, mientras estØ en uso la mÆquina para hacer helado
.
5.Coloque el bote en la cubeta de madera y asegœrese
de que el cono encaje en el centro de la cubeta. (Ver
Dibujo 4)
6. Deslice el extremo rectangular de la manivela manual o
el motor elØctrico en el agujero rectangular del borde de
la cubeta (Dibujo 5a). El extremo opuesto de la
manivela caerÆ dentro del extremo abierto, donde estÆ
el cerrojo (Dibujo 5c). Suavemente levante el cerrojo a
fin de que el cerrojo de alambre pase sobre el extremo
redondeado de la manivela manual o del motor (tal vez
necesite rotar el bote con la mano para que la tapadera
quede ajustada al motor y/o a la manivela) . (Dibujo 5b)
Dibujo 5a
Dibujo 5b
Dibujo 5c
Dibujo 4
Get user manuals: