background image

BES810

the

 Duo-Temp

 Pro

Instruction Booklet

Registered in England & Wales No. 8223512. Due to continued product improvement, the products illustrated or 

photographed in this document may vary slightly from the actual product.  

Copyright BRG Appliances 2014. 

BES810 UKM Issue - A14

Freephone (UK Landline):

 0808 178 1650 

Mobile Calls (National Rate): 

0333 0142 970

www.sageappliances.co.uk

[email protected]

Register your product and 

get more from your purchase

Product registration takes only a few 

minutes and ensures a record of your 

purchase. Registration also makes it 

easier to get support and advice on any 

questions or issues that you might have 

in the future. If you wish, we can also 

send you free recipes and additional 

hints and tips on making the best of 

your appliance.

Go to www.sageappliances.co.uk 

and click on ‘Product Registration’.

What’s on your mind?

Our constant aim is to improve the 

quality and features of our appliances. 

We welcome your comments and ideas 

in assisting our ongoing development.

Go to www.sageappliances.co.uk 

and click on ‘Support’.

Sage

 by Heston Blumenthal

  

Customer Service Centre

Summary of Contents for BES810















Reviews: