Salzburg TCBM-TCPW
English
05060207 00 03-2020
44
1
2
3-4
Plastic
(door seal
profiles)
• use a cloth soaked in neutral deter-
gent
•
clean with a cloth soaked in clean
water
DO
NOT use waxes, concentrated detergents,
which contain oil, bleach, glass cleaners, abra
-
sive detergents or flammable fluids
Aluminium
•
Use a soft cloth with a neutral de
-
tergent or soap and lukewarm wa
-
ter (max 30°C)
•
Immediately remove all traces of
water or detergent using a dry
cloth in order to prevent marks
from forming.
DO
NOT use acid or alkaline detergents (e.g.
bleach) which could corrode the surfaces
DO
NOT use rough or abrasive materials or
metal scrapers that scratch the aluminium
surfaces
DO
NOT use steam cleaning equipment
DO
NOT use dirty cloths
Wood
•
Use a soft cloth with a neutral de
-
tergent or soap and lukewarm wa
-
ter (max 30°C)
•
Immediately remove all traces of
water or detergent using a dry
cloth in order to prevent marks
from forming.
•
If necessary, before treating the en
-
tire surface, test on a small hidden
area and verify that the cleaner will
not damage the finish or colour
DO
NOT use spray cans, acid or alkaline de-
tergents (e.g. bleach), soda or solvents which
could corrode the surfaces
DO
NOT use rough or abrasive materials that
could scratch the surfaces
DO
NOT use steam cleaning equipment
DO
NOT use rough cloths
mod
erate the use of liquid detergent: overuse
causes seepage and then swelling of the wood
22.6 Clean the stainless steel
Certain situations can cause the formation of rust on the surfaces in steel, such as:
remains of iron left on damp surfaces, limescale, unrinsed chlorine-based or ammonia-based deter
-
gents, encrustations or food residue, salt-salt solutions, dry residue of evaporated liquids
Remedy
recent stains and rust:
clean with shampoo or neutral detergents, using a sponge or a rag.
When finished, eliminate any detergent residue, rinse and thoroughly dry the surfaces.
old stains and rust:
use chemical substances on the stainless steel that contain 25% of nitric acid or similar
substances.
persistent stains and rust:
sand with a stainless steel brush, wash with detergent and dry thoroughly.
This intervention may however cause scratches to the surfaces due to the abra
-
sive cleaning method.
DO NOT
use hydrochloric acid on stainless steel surfaces
CAUTION
! Slippery floor. Falling.
Remove from the floor any items such as sponges, rags, waste of water or detergent.
Carefully clean any residue of detergent or sanitizer.