Salzburg TCBM-TCPW
English
05060207 00 03-2020
42
DANGER! Live parts. Electrocution.
REMOVE THE ELECTRIC POWER SUPPLY BEFORE ANY OPERATION!
DO NOT wet, spray water or clean the electrical parts of the cabinet directly (fans, inte
-
rior lighting, electrical cables etc.)
DO NOT touch the counter with wet or damp hands or feet
CAUTION
! Hot surfaces. Injuries, burning. Glass breakage.
Wait for the glass parts to reach room temperature.
DO
NOT use cold water on hot glass surfaces Fig. 19.
Protect hands with work gloves
i
The products will deteriorate due to germs and bacteria.
Observe hygiene regulations to ensure the health of the consumer.
The cleaning operations must include:
Step
Name
Description
1
Washing
Mechanical roughing, removal of approximately 97% of the dirt
2
Sanitization
cdisinfection:
-
detergents
: elimination of visible dirt
-
disinfectants
: removal of pathogenic micro-organisms that remain
after washing
3
Rinsing
4
Drying
22.1
Cleaning products
Use (Fig.19)
-
clean water at maximum temperature of 30°C
-
soft cloth
- mild and neutral detergents
Do not use
detergents
(Fig.19)
-
alcohol or similar products to clean the parts in methacrylate (Plexiglas)
-
in powder
-
with granules
-
either acidic or alkaline (bleach, ammonia)
- concentrates
-
with unknown chemical composition
-
abrasive products, chemical/organic solvents
-
abrasive sponges, scourers, sharp tools
-
aggressive solvents (acetic acid, citric acid etc.)
22.2
General information
•
The surfaces to be cleaned and the detergents and water used for cleaning must not exceed a
maximum temperature of 30°C.
•
Dry surfaces with a soft cloth
CAUTION
!
Fragile surfaces, glass. Dents, scratches, corrosion, wounds, broken glass
DO
NOT aim the jet directly at the varnished or plasticised surfaces
DO
NOT apply the detergents directly onto the surfaces to be cleaned
DO
NOT use steam cleaning equipment
DO
NOT use excessive force
DO
NOT direct the jet too close to the dirt as it may injure the operator or contaminate the
environment and parts that have already been cleaned.
avoid detergents from coming into contact with nearby products.
CAUTION
!
Floor products. Vapours. Corrosion. Breathing difficulty.
avoid contact, inhalation.