Lisbona 2
English
05060167 00 09-08-2016
47
Spring units load
indicati ve chart
Manual blinds width (mm)
<1250 >1250
Recommended preload with sheet rolled up (no. of windings)
20-30 25-30
Sprin max load with the sheet rolled completely (no. of wind-
ings)
50
55
Installati on pro-
cedure
automated blind
Step
Acti on
1
insert stopper F, turn it and lock it in housing D
2
insert the blind using pin G
3
insert the opposite stopper, repeat step 1
20. Maintenance and cleaning
DANGER! Live parts. Electrocuti on.
REMOVE THE ELECTRIC POWER SUPPLY BEFORE ANY OPERATION!
DO NOT wet, spray water or clean directly the electrical parts of the cabinet (fans, inte-
rior lighti ng, electrical cables etc. )
DO NOT touch the cabinet with wet or damp hands and feet.
CAUTION
! Cold surfaces. Injuries, burning. Glass breakage.
Wait for the glass parts to reach room temperature.
DO NOT
use hot water on the cold glass surfaces.
Protect the hands with work gloves.
i
The products will damage due to germs and bacteria.
Compliance with Hygiene Standards and the cold chain is indispensable to guarantee the
protecti on of the consumer's health.
The cleaning operati ons must include:
Step
Name
Descripti on
1
Washing
roughing, removal of approximately 97% of the dirt)
2
Saniti zati on
cdisinfecti on:
-
cleansing
: removal of visible dirt
-
disinfecti on
: removal of pathogenic micro-organisms that remain
aft er washing
3
Rinsing
4
Drying
20. 1
Cleaning products
Best
(Fig.21)
-
clean water at maximum temperature of 30°
-
soft cloth
-
mild and neutral detergents
Do not use
alchool-based
(Fig.20)
-
cleaners or similar products to clean the parts in methacrylate (Plexiglas)
-
in powder
-
with granules
-
either acidic or alkaline (bleach, ammonia)
-
concentrates
-
with unknown chemical compositi on
-
abrasive products, chemical/organic solvents
-
abrasive sponges, scourers, sharp tools
-
aggressive solvents (aceti c acid, citric acid etc.)
