SECTION 3
GETTING STARTED
PAGE 55
9711-26020-0001
Exp o rt Co n tro lle d – S e e P a g e 3
Rev B
STEP
ACTION
CONDITION OR INDICATION
4.
Slide the latch up until the button pops
out. The battery is now locked in place.
5.
If your X10gx has only one battery, go to
Step 9.
6.
If your X10gx has two battery packs,
slide the top latch open.
7.
Install the second battery and press
down until the connector seats.
8.
Slide the latch down until the button
pops out.
9.
Connect the AC adapter to the AC
adapter port on the left side of the tablet
and allow the batteries to charge until all
fuel gauge LEDs are on steady and the
battery status LED on the front panel is
off. This will take from 2–4 hours.
You can power up and operate the X10gx
while the batteries charge, but the total
charging time may be longer depending
on the initial charge of the batteries and
the power demands of the computer.
