manualshive.com logo in svg

ARM Express uATX, Technical Reference Manual, Page: 69 / 98

Share
Download
ARM Express uATX Technical Reference Manual Download Page 69

Programmers Model 

ARM DUI 0447J

Copyright © 2009-2014, ARM. All rights reserved.

4-29

ID052914

Non-Confidential

The motherboard has been tested at 800 x 600 x 16-bit with a static color chart. However, 
practical resolution and color depth depend on available bus bandwidth. If a CLCDC in a 
daughterboard is the video source, the actual resolution range depends on the daughterboard 
CLCDC.

4.5.3

Compact Flash interface

The Compact Flash interface is a custom AMBA AHB-compliant SoC peripheral that is 
developed, tested, and licensed by ARM.

The module is an AMBA slave module and connects to the 

Advanced High-performance Bus

 

(AHB). The interface supports:
•

True IDE Mode, 16-bit.

•

IO Mode, data and task file register read and write access only.

Table 4-24

 provides information about the CompactFlash interface.

CompactFlash Control Register

The CF_CTRL Register characteristics are:

Purpose 

The CompactFlash control register 

0x0001A300 

provides control and status 

information for the inserted CF card.
If your daughterboard uses the ARM Legacy memory map the 
CompactFlash control register is at SMB CS7 base a 

0x1A000

.

If your daughterboard uses the ARM 

Cortex-A Series

 memory map the 

CompactFlash control register is at SMB CS3 base a 

0x1A0000

.

Note

 

See the Technical Reference Manual for your daughterboard.

Usage constraints 

There are no usage constraints.

Configurations 

Available in all configurations.

Figure 4-16 on page 4-30

 the register bit assignments.

Table 4-24 CompactFlash implementation

Property

Value

Location

Motherboard IO FPGA

Memory base address

Access 

SMB CS7 base a 

0x1A000

Control 

SMB CS7 base a 

0x1A300

Interrupt

-

DMA

-

Release version

Custom logic

Platform Library support

yes

Reference documentation

CF+ and CompactFlash Specification Revision 4.1

Summary of Contents for Express uATX



































































































Reviews:

No comments