manualshive.com logo in svg

ARM Express uATX, Technical Reference Manual, Page: 68 / 98

Share
Download
ARM Express uATX Technical Reference Manual Download Page 68

Programmers Model 

ARM DUI 0447J

Copyright © 2009-2014, ARM. All rights reserved.

4-28

ID052914

Non-Confidential

Table 4-23

 provides information for the CLCDC.

The following locations are reserved, and must not be used during normal operation:
•

Locations at offsets 

0x030

 to 

0x1FE

 are reserved for possible future extensions.

•

Locations at offsets 

0x400

 to 

0x7FF

 are reserved for test purposes.

Note

 •

Different display resolutions require different data and synchronization timing. 

OSCCLK1

, 23.75MHz default, is assigned as 

CLCDCLK

 for the LCD controller. The 

Post Screen has a 640x480 VGA 8-bit color pallet. Default display resolution is 1024x768 
at a 60Hz frame rate. The default color depth is 16-bit. See the 

ARM

®

 PrimeCell Color 

LCD Controller (PL111) Technical Reference Manual

 for a description of the LCD timing 

registers.

•

The DVI controller display settings are configured with DVIMODE in the 

config.txt

 file. 

See the 

ARM

®

 Versatile

™

 Express Configuration Technical Reference Manual

 or 

System 

Configuration registers

 on page 4-21

.

Display resolutions and display memory organization

Different display resolutions require different data and synchronization timing. Use registers 
CLCD_TIM0, CLCD_TIM1, CLCD_TIM2, and OSCCLK1 to define the display timings.

The mapping of the 32 bits of pixel data in memory to the RGB display signals depends on the 
resolution and the display mode.

For information on setting the red, green, and blue brightness for direct, non-palettized, 24-bit 
and 16-bit color modes, see the 

ARM

®

 PrimeCell Color LCD (PL111) Technical Reference 

Manual

. Self-test example code, that displays 24-bit and 16-bit VGA images, is also provided 

on the accompanying DVD.

Note

 For resolutions based on one to 16 bits per pixel, multiple pixels are encoded into each 32-bit 
word.

All monochrome modes, and color modes using eight or fewer bits per pixel, use the palette to 
encode the color value from the data bits. See the 

ARM

®

 PrimeCell Color LCD (PL111) 

Technical Reference Manual

 for information.

Table 4-23 CLCDC implementation

Property

Value

Location

Motherboard IO FPGA

Memory base address

•

ARM Legacy memory map:
—

SMB CS7 base a 

0x1F000

.

•

ARM 

Cortex-A Series

 memory map:

—

SMB CS3 base a 

Ox1F0000

.

Interrupt

14

DMA

-

Release version

ARM CLCDC PL111, version r0p2.

Reference documentation

ARM

®

 PrimeCell Color LCD Controller (PL111) Technical Reference Manual

.

Summary of Contents for Express uATX



































































































Reviews:

No comments