20
Clip Sling (3 Steps)
For more information, refer to respective sling
IFU
.
1
Place the clip on the spreader bar lug.
(See Fig. 1)
2
Pull the strap down.
(See Fig. 2)
3
Make sure all lugs are locked at the top end of the clips and
no straps are not squeezed in between the clip and the
spreader bar.
(See Fig. 3)
Loop Sling (3 Steps)
The illustration is an example of a hook with latch. The spreader
bars or stretcher frames might be of a different design.
1
Place the loop over the spring loaded latch.
2
Pull the loop down to force the latch to open.
3
Make sure that the spring loaded latch closes completely
with the loop inside the hook.
(See Fig. 4)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Latch
Hook
Attachment of Clip/Loop (Passive Sling)
Summary of Contents for Maxi Twin
