17
Powered Spreader Bar
Four sling attachment lugs
(A)
enable the sling clips to be
attached.
The rotational positioning handle
(B)
allows you to position the
resident sideways.
The powered spreader bar
(C)
is operated from the hand control.
The resident can be positioned in a reclined or sitting position.
(See Fig. 1)
Automatic Safety Stop
This is not operator controlled but a function built into the
electronics of the lift.
Battery
The battery is situated on the side of the lift actuator housing.
(See Fig. 1)
Battery Indicator Light
A beeping sound and a low battery indicator (A) light will flash
when the battery needs charging. The caregiver should complete
the current lift movement.
(See Fig. 1)
Battery Charger
Type no:
NEA 8000
(See Fig. 2)
Function I:
If the lift is moving up /down and it moves against
something, the movement will be stopped by an
automatic safety stop. Release the up /down button on
the hand control.
Function II:
If the lift is mistakenly overloaded with a resident
heavier than permitted, an automatic safety stop will
automatically be activated. If this occurs, stop pressing
the up button on the hand control. Lower the resident by
pressing the down button and then remove the resident
from the lift.
NOTE
The battery shape only fits correctly into the lift with its
raised edge upwards.
Fig. 1
A
B
A
C
A
Fig. 1
Fig. 2
Summary of Contents for Maxi Twin
