Arjohuntleigh Maxi Twin, Instructions For Use Manual

Page: 14 / 56

14
Hand Control
The hand control has an integrated hook which makes it easy to
attach. When not in use, hook it over the hand control hang point
at the top of the mast
(B) or the hand control holder located on the
main lift actuator (A) . (See Fig. 1)
Unhook the hand control and hold it in your hand:
• Press ( A) button in order to raise the jib. (See Fig. 2)
• Press ( B) button in order to lower the jib. (See Fig. 2)
• Press ( C) button for reclined position ( only for powered
spreader bar ). (See Fig. 2)
• Press ( D) button for sitting position ( only for powered
spreader bar ). (See Fig. 2)
• Press ( E) button to close chassis legs.
(See Fig. 2)
• Press ( F) button to open chassis legs.
(See Fig. 2)
Lifting
The lifting/lowering movement is performed by an actuator driven
by an electric motor.
Adjustable Width of Chassis Legs
The chassis legs can be opened to variable widths.
Select the “Open chassis legs” button on the hand control and
keep pressing it until the required width is achieved.
To close, press the “Close chassis legs” button. When pressure is
released from the button, movement will stop and the chassis legs
will remain securely in position.
(See Fig. 3)
CAUTION
Do not drop the hand control into water.
NOTE
When opening or closing the legs of the powered
chassis, make sure that no one stands in the way of the
moving chassis legs.
A
B
Fig. 1
A
B
C
D
E
F
Fig. 2
Fig. 3
Product Description/Function