Page | 7
Commercial in confidence. Instructions For Use Revision SOR-REV5-090921
4. ELECTRONIC FUNCTIONS DESCRIBED
- Continued
4.4 Auto Contour Positioning
NOTE:
This control function is available on both control devices fitted to the bed.
To move the auto contour positioning press and hold the appropriate button on the
control device. Auto Contour Positioning provides synchronised movement of the
backrest and knee positioning in one operation. The position helps provide a more natural
resting environment for the patient.
4.5 Tilt Positioning
–
Trendelenburg / Reverse Trendelenburg
CAUTION
Trendelenburg function should only be used under professional supervision.
NOTE:
This control function is only available on the Foot Board Control Panel.
To move the tilt positioning press and hole the appropriate button on the control panel.
The tilt button allows the bed to be positioned in a foot or head down tilt position. Tilt
positioning achievable is between 0° and 14° for both head and foot down tilting.
•
In use the mattress platform may initially rise before tilting. The bed will
automatically adjust to ensure that there is adequate clearance between the
mattress platform and the mechanical structure of the bed before tilting.
•
When reversing the tilt angle of the bed with the tilt button remaining
depressed, the mattress platform will pause at horizontal for two seconds
before continuing with the tilting movement.
4.6 Bed Levelling Function
NOTE:
This control function is only available on the Patient Handset.
Pressing
“BED LEVEL”
will lower the deck until it is horizontal while simultaneously
lowering the backrest and knee break back to a flat deck position.
4.7 Chair Positioning Function
NOTE:
This control function is available on both control devices fitted to the bed.
Press and hold the
“CHAIR POSITION BUTTON”
until the desired position is reached.
TO RETURN THE BED TO A FLAT POSITION
use the individual movement buttons
(knee positioning, backrest etc) as required.
