Page | 12
Commercial in confidence. Instructions For Use Revision SOR-REV5-090921
5. GENERAL BED OPERATION
-
Continued
5.3 Fold Down Side Rails
(if fitted)
The (optional) bed rails are easily fitted by clamping to the side rail of the bed.
Medical equipment international standard IEC 60601-2-52, which includes specific rail entrapment
requirements are complex and strict. The Sorrento bed rails meet these requirements when fitted
correctly.
5.4 Fitting the Side Rails
NOTE* The rails are a left and right-hand set and when fitted correctly fold down towards
the foot end of the bed.
1. Before fitting the rails unscrew the M10 bolts on both clamp brackets bringing the locking
clamps into an open neutral position.
2. With both bolts now unscrewed, lift the rail into position. It is important that the rails are fitted to
a specific position on the bed, which is indicated by the disc on the top of the side rail. Position
the rail over the disc and tighten the bolts to the closed position.
