Page | 17
Commercial in confidence. Instructions For Use Revision SOR-REV5-090921
8. CLEANING
WARNING
Before cleaning always disconnect the bed from the mains power source.
Note:
It is strongly recommended that protective clothing be used when carrying out cleaning
processes on the Sorrento bed.
Note:
The following procedure also applies to the beds accessories but does not include
mattresses.
•
Wipe the beds surfaces with a soft cloth moistened with hot water and mild detergent
(or the facilities recommended cleaning solution). It is recommended that the cloth be a
white material to prevent bleeding of die colours to the bed. Take extra care in areas
that can harbour dirt, or dust.
•
Rinse with clean water if required and a dry with a clean cloth.
•
To remove potentially infectious materials such as body fluids, or when the bed has
been used by someone with a known infection. Clean with NaDCC (e.g. Presept,
Actichlor) at 10,000 ppm of available chlorine. Rinse and dry.
•
Allow the cleaned parts to dry before replacing the mattress.
CAUTION
Do not use abrasive Hypocarbonate, or Phenolic compounds or pads.
