Ariston Fi7 16L FF, Service Manual

Page: 30 / 57

Technical Manual for DGI
- 30 -
z
Recommendations:
At the location to install the heater, fix a leakage alarming and cutting-off unit for gas. Horizontal
instance between the unit and the heater should be less than 4 m, vertical distance between the
unit and ceiling less than 30 cm (for town gas), height from the floor less than 30 cm (for natural
gas, liquefied petroleum gas).
! Attention
An exhausting tube should be installed at the flue outlet to exhaust the fume to outdoors.
! Mind: It is strictly prohibited to install the heater at the places stated below:
(1) Bedroom, dressing-room, darkroom
(2) Basement, electrical appliance and meter room, boiler room.
(3) Sites where is of inflammable, explosive or erosive materials. Such as the places: Beauty
parlor, laundry etc. where the erosive gas is easy to be produced, the erosive gas will rust
the heater badly.
(4) Sites where occur significant vibration or any other factors that may affect the heater’s
normal operation.
2.4 Fixation of the heater
z
Drill the wall and insert 2
×Φ
8 expansion pipe as per the outlook drawing of water heater and
drawn pitch for suspending installation holes.
z
Fix the hanger support with 2
×Φ
8
×
50 screw nails to the wall.
z
Suspend the water heater on the hanger support.
z
Attention:
Considering the water heater will apply about 16kg load on the wall, please take reinforcement
actions if loading capacity is insufficient.
Inlet port.
Here lead directly to the air outdoors.