Arista ARP-5500AX-E01 Series, User Manual

Page: 23 / 69

23
I
3. Benchtop stand mounting
The ARP-5500AX-E01 Series waterproof industrial panel computer can be placed on a
table or bench by mounting it onto the metal benchtop stand. To mount it onto the benchtop
stand, you will require mounting screws found in the accessory box.
As shown in the figure below, please follow these steps to mount the computer.
Step 1: Place the metal mounting plate on the back of the ARP-5500AX-E01 Series
waterproof industrial panel computer, and align holes on the mounting plate with holes on
the computer.
Step 2: Use a screwdriver to tighten the six “ #8-32UNC ” sized screws to fix the metal
mounting plate on the computer.
Step 3: Take the metal benchtop stand, and situate the computer into the benchtop stand.
Align holes on the side of the mounting plate with holes on the benchtop stand.
Step4: Use a screwdriver to bolt the “ #8-32UNC ” sized screws to the mounting plate and
benchtop stand. Make sure the computer is firmly secured on the benchtop stand.
Screws
Mounting plate
Screws