Arista ARP-5500AX-E01 Series, User Manual

Page: 21 / 69

21
I
2. Wall mounting
As shown in the figure below, please follow these steps to mount the computer.
•
Step 1: Place the metal mounting plate on the back of the ARP-5500AX-E01 Series
waterproof industrial panel computer, and align holes on the mounting plate with holes
on the computer.
•
Step 2: Use a screwdriver to tighten the six “ #8-32UNC
” sized screws to fix the metal
mounting plate on the computer
(Generally, the metal mounting plate is pre-installed on the
back of the ARP-5500AX-E01 Series waterproof industrial panel computer.). .
•
Step 3: Place the VESA bracket on the wall or board, and align holes on the VESA
bracket with holes on the wall or board.
•
Step 4:
Use a screwdriver to tighten screws to fix the VESA bracket onto the wall or
board.
•
Step 5: Mount the computer onto the wall or board through the mounting plate and
VESA bracket. Visually inspect the computer to be sure that it is properly and securely
situated onto the wall or board.
Screws
Mounting
plate
VESA
bracket
Wall or board