MAINTENANCE
14.203.B_A707 en.SM.V4.3X
ARGUS Medical AG 28.03.06 / PJ
31 / 48
2. Press “START/STOP” to
store the values for the up-
and downstream sensor.
3. Press “MODE”.
Display shows “CAL 1.0b”.
2. Select address 399
and press “MODE”.
4. Press “START/STOP”.
Display shows “Set - 1-”.
2. Press “START/STOP”.
Display shows “CAL. door”.
1. Press key "1" to select the set num-
ber you want to calibrate (1 to 4).
6.3.2. Enter into the pressure calibration mode
6.3.3. Set selection before calibrating
6.3.4. Calibrating the offset of both sensors
1. Enter into the
configuration
mode
(see chapter 2.3.).
1234
.
399
3. Enter value 1234.
1. Remove the IV set and
open the door.
“CAL. door”
Before you select an
IV set, check
chap. 2.8.
