ARGUS service
14.203.B_A707 en.SM.V4.3X
ARGUS Medical AG 28.03.06 / PJ
20 / 48
Select the next step by pressing one of
the buttons (configuration, calibration or
toolbox).
4.2. ARGUS service – Configuration
Important remark:
After configuration change, a function check
and control measurement has to be done!
4.2.1. Configuration tree structure
The configuration is split into 4 parts:
Configuration (part 1)
All configuration possibilities (indexes) mentioned in
chapter 2.7
can be modified
herein in its own tree structure as shown below.
All indexes which are different from the pump firmware default are high lighted.
Calibration (part 2)
Details of the pump calibration can be read out of the pump.
The calibration cannot be modified herein.
Statistic (part 3)
Details about last used infusion parameters, total of infused volume and infusion
time and so on are shown.
Also the last technical failure numbers are listed in this part.
ARGUS (part 4)
This part contains ex-works settings (e.g. pump serial number)
# 20, 22-30, 32-34, 369
# 1, 7, 8, 15, 16, 45, 46, 48, 56, 366
# 2-5, 14, 39, 49, 361, 365
# 11-13, 17, 38, 40-42, 60
