Check for parts online at www.HuntRiversEdge.com or call 800-345-6007 M-F 8-5
7
Operator's Manual
CAGE™ R30
STEP 5
STEP 6 - VERY IMPORTANT STEP!
5. Unzip the door and enter the blind. Place palm of your hand on
the roof hub and push the spring loaded roof straight up until it
pops over center. SEE FIGURE 4.
NOTE: For easier set up, it’s best to open up some window panels
to allow light into blind for better visibility.
NOTE: The roof hub is under spring tension; use extreme caution
when popping roof up and collapsing roof down to avoid injury
to face, head or hands. Keep fingers clear of roof hub/pole ends
to avoid pinching fingers.
6. Spin the roof lock clockwise (upward) to lock roof poles in place. SEE FIGURE 5A. You must push upward on roof fabric to make sure
roof lock fully engages and that ALL (4) poles are on the outside rim of roof lock.
The roof lock should be nested tightly with roof poles on outside edge of the roof lock SEE FIGURE 5A. The roof lock is installed wrong
if the roof poles are on top of the roof lock leaving a gap SEE FIGURE 5B.
FIGURE 4
FIGURE 5A - CORRECT INSTALLATION WITH ROOF POLES
ON OUTSIDE EDGE OF LOCK HUB
FIGURE 5B - WRONG INSTALLATION WITH ROOF POLES
ON TOP OF LOCK HUB
PUSH HUB UP
TURN UP &
CLOCKWISE
TO LOCK
WRONG
CORRECT
