Check for parts online at www.HuntRiversEdge.com or call 800-345-6007 M-F 8-5
9
Operator's Manual
CAGE™ R30
STEP
12 - 14
STEP
11
11. Install (4) vertical spreader poles with the round peg ends. With
clamp on the vertical pole in the unlocked position, place peg
into hole on bottom corner hub. SEE FIGURE 8A & 8B.
NOTE: The larger diameter pole should go towards the bottom
corner.
12. Slide the pole up and place peg into hole in top corner hub. You
will need to keep pressure on bottom pole to ensure both pegs
stay located in the hubs. SEE FIGURE 9A & 9B.
13. While keeping vertical poles spread apart, flip clamp lever on the
vertical pole into the locked position.
14. Repeat step 12 for remaining (3) vertical spreader poles.
FIGURE 8A
FIGURE 9A
FIGURE 9B
FIGURE 8B
INSERT
PEG