Fabric Canopy
Edge Rafters (2)
Support Arms*
Small Screws*
Top Trim (attached)
Center Rafter(s)
Camel Back Wall Brackets*
Large Screws*
Front Trim (attached)
Mounting Bar
Machine Screws (its tip is flat)
Series 2700
Fabric Door Canopy
Actual Size - End Views of Canopy parts for easy reference and assembly:
Mounting Bar
Top Trim
Front Trim
Edge & Center Canopy Rafter
Phillips, Regular & 1/4” Hex Head
Screwdrivers or Drill Bits
Power Drill
Level
Tape Measure
Series 2700 Parts Check List:
Required Tools:
mounting
bar
top
trim
(pre-attached on
the underside of
the canopy)
support
arms
camel
back
wall
brackets
front
trim
(pre-attached on the
underside of the canopy)
edge
rafters
center
rafter
(
s
)
fabric
canopy
camel
back
wall
brackets
(pre-attached to the outside, Front Trim
ends of the Edge Canopy Rafters)
1
2
3
It is our recommendation that you read instructions
carefully prior to assembly and installation.
Series 2700 Fabric Door Canopy
*QUANTITIES & SIZE OF PARTS MAY VARY BY AWNING SIZE AND MODEL SERIES
www.nuimageawnings.com
