ONE-TIME TOP INSTALLATION
Unpack and Open
1.
Place your E-Z UP
®
Frame
in the center of the area to be sheltered.
2.
With partner on the opposite side of the
Frame
, grasp two outer legs, lift the
Frame
slightly off the ground,
and step backwards while pulling the
Frame
to open.
(Fig A)
3.
Stop when the
Frame
is approximately 1/2 of its fully-opened size.
4.
Set the
Frame
back on the ground.
Attach Fabric Top
5.
Gently unfold the
Fabric Top
, and place it over the semi- opened
Frame
.
(Fig B)
6.
Attach the
Fabric Top
to the E-Z UP
®
Frame
by matching the Hook and Loop strips on the inside of the
Fabric Top
corners with the Hook and Loop strips on each
Frame
corner.
(Fig C)
7.
Pull the
Fabric Top
down over the
Frame
corners—pushing the Hook and Loop strips firmly together.
Secure Top to Frame
8.
Line up the grommet holes on the sides of the
Fabric Top
to the
Frame
top attachment points.
The top attachment points on the
Frame
are denoted by the RED tags.
(Fig D)
9.
Using a coin, unscrew the
Top Attachment Nut
from the frame bolt.
(Fig E)
10.
Place
Fabric Top
grommet on the
Frame
bolt.
11.
Screw on top attachment nut and tighten until snug.
Top Fabric
should rotate easily. Do not over-tighten.
12.
Repeat this procedure at each of the top attachment points.
Note: Hold the bolt assembly with one hand while tightening the top attachment nut with your other hand.
(Fig A)
(Fig C)
(Fig E)
(Fig D)
(Fig B)
(Remove Tag before Attaching Top)
Shelter has Six Attachment Points
•
1 Attachment Point on Each 10’ Side
•
2 Attachment Points on Each 20’ Side
20’ Side
(Fig A)
(Fig C)
(Fig B)
SET UP
OPEN E-Z UP
®
Shelter
1.
With a partner on the opposite 10' side, grasp the bottom of the diamond-shaped area of outer trusses near
the “OPEN HERE” sticker.
(Fig A)
2.
Lift the
Frame
up slightly and step backward until the shelter is almost fully opened. Gently shake the shelter
while opening. Be careful not to pinch fingers!
Secure Auto-Slider
®
Pull Pin
3.
Fold up the
Fabric Top
corner to expose the Auto-Slider
®
Pull Pin.
(Fig B)
4.
Lift shelter corner slightly off the ground and engage the Auto-Slider
®
Pull Pin by pushing up on the
Frame
side trusses with one hand while holding down the top of the
Frame
leg with the other hand.
The pins will auto-engage when aligned with the holes on the frame legs.
5.
After the Auto-Slider
®
Pull Pin has locked into place, pull the
Fabric Top
down over the frame leg, making
sure to align and secure the hook and loop strips on the
Fabric Top
to the
Frame
.
Repeat on all remaining corners.
Extend & Secure Frame Legs (Fig C)
6.
With a partner, lift the two adjacent outer legs up off the ground simultaneously to about waist height.
7.
Slide the lower/inner legs out until the leg adjustment toggle buttons lock at selected height on each leg.
Note: There are 5 adjustment settings on each leg.
8.
Lower middle leg until the toggle button locks.
9.
Repeat on the remaining legs.
Note: It is recommended that you use genuine E-Z UP
®
Deluxe Weight Bags and/or Heavy-Duty Stake Kits to secure your shelter.
Top of Frame Leg
Fabric Top Corner
Auto-Slider
®
Pull Pin
WHAT’S IN THE BOX
(1) 10’x20’ Vantage
TM
Frame, (1) Recreational Grade Top, (1) 6-Piece Spike Kit and (1) Wide-Trax
TM
Roller Bag
INSTRUCTIONS FOR
Frame
Fabric Top Frame
OPEN HERE
OPEN HERE
Toggle Leg Adjuster
Frame
Fabric Top
ezup.com
800-45-SHADE
INTERNATIONAL E-Z UP, INC.
1900 Second St., Norco, California 92860
The #1 Instant Shelter
®
Brand in the World
