Check for parts online at www.HuntRiversEdge.com or call 800-345-6007 M-F 8-5
8
Operator's Manual
CAGE™ R30
STEP 7 - 9
STEP
10
7. Unpack the horizontal and vertical spreader poles from the pole
bag.
8. Starting with the (4) horizontal spreader poles with the disc
shaped ends, place one end into slot on any top corner hub. Make
sure clamp is in the unlocked position. SEE FIGURE 6A & 6B.
Insert opposite end of spreader pole into slot of top corner
hub located across the same side of blind. Slight rotation of the
spreader pole will help with full engagement of each pole end
into the slots.
9. Repeat step 8 for remaining (3) horizontal spreader poles.
DO NOT lock clamps yet.
10. Attach Velcro around spreader poles located in center top.
SEE FIGURE 7.
FIGURE 6A
UNLOCKED
CLAMP
UNLOCKED
CLAMP
FIGURE 6B
FIGURE 7
