Check for parts online at www.HuntRiversEdge.com or call 800-345-6007 M-F 8-5
6
Operator's Manual
CAGE™ R30
SET-UP INSTRUCTIONS
STEP
1 & 2
STEP 3 & 4
1. Remove the blind from carry bag.
2. Lay the blind flat on the ground so any wall panel is facing
upward. Be completely sure there is no material twisted or
overlapping the ends of any poles. SEE FIGURE 1.
3. Grab the handle on the eyelet located in the center of wall and
pull upward so it pops open. SEE FIGURE 2.
NOTE: Walls are meant to be strong/ridged and will require a
fair amount of force to pop over center for set up
4. Repeat step 3 for the remaining walls so the blind is standing up.
SEE FIGURE 3.
FIGURE 1
WALL
FIGURE 2
FIGURE 3
