Arctiko LTF 225, Operating Instructions Manual, Page: 15 / 20

15
Cleaning and Maintenance of the Freezer
1. Ice on the inside of the box should be removed as required, as it reduces the cooling capacity! Take
the contents out of the freezer. Pull out the plug and leave the lid open until the ice can be removed.
(Remember safety gloves).
2. Dry the inner container with a cloth until it is not damp any longer!
3. Clean the outside of the freezer with a damp cloth. Be careful not to get damp (water) on the
electrical parts, or water into the vent holes, as water and damp may damage the electrical parts and
cause the freezer to short-circuit!
4. The ice formed on the inside of the lid should be removed with a wooden/plastic scraper. This ice will
build up because of the low temperatures inside the box, and if it is not removed it will cause the lid
to open.
5. Use authorised cleaning products. The use of alcohol, dissolvents and alkaline cleaning agents is
prohibited.
6. Clean the vent holes on the rear condenser with a vacuum cleaner at least once a year
(see the sketches).