3-22
7. Remove the shift shaft (E); then remove the shift
cam/detent assembly (F).
8. Using a plastic mallet, drive the input driveshaft
(D) and bearing from the transmission case.
YT037
F. MAIN SHAFT
NOTE: If not absolutely necessary to replace
components, do not disassemble the main shaft.
To disassemble the main shaft components, use the
following procedure.
1. Remove the forward gear spacer and thrust
washer; then remove the forward gear. Account
for the forward gear bushing and washer.
YT063
YT085
2. Remove the forward/reverse shift dog.
YT081
3. Remove the reverse gear snap ring and splined
washer; then remove the reverse gear and thrust
washer.
YT080
YT053
Servicing Right-Side
Components
TRANSMISSION COMPONENTS
1. Inspect all gears for chipping, excessive wear,
flaking, or discoloration.
AT THIS POINT
The main shaft is now completely disassembled for
inspection.
Back to TOC
Back to Section TOC
Next
Back
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
