51
GENERA
L INFOR
M
A
T
ION
Throttle Limiter Screw
ATV-0053
Throttle lever travel may be limited by
adjusting the throttle limiter screw. The
throttle limiter should be adjusted
according to the operator’s skill and
experience. To adjust the throttle lim-
iter, use the following procedure.
1. Loosen the jam nut.
2. Turn the throttle limiter screw
clockwise to decrease engine RPM
maximum or counterclockwise to
increase engine RPM maximum.
3. Tighten the jam nut securely.
NOTE: The ATV is equipped with
an RPM limiter that retards ignition
timing when maximum RPM is
approached. When the RPM lim-
iter is activated, it could be misin-
terpreted as a high-speed misfire.
Auxiliary Brake Pedal
CF117
Pressing the auxiliary brake pedal
downward will apply the brake to the
rear wheels.
SPEEDOMETER/LCD
NOTE: All segments of the LCD
will activate for approximately two
seconds when the ignition switch
is rotated to the ON position.
CF236A
1. Clock/Engine Hour Meter - The
clock function indicates time in the
12-hour mode; the hour meter
indicates the total time the ATV
has run and cannot be reset to zero.
To set the clock, use the following
procedure.
A. With the ignition switch ON,
press and release the Mode
Button (3) until the Clock/
Engine Hour Meter (1) is dis-
played; then (if necessary)
press and release the Set/Reset
Button (4) to select the clock
display.
B. Press and hold the Set/Reset
Button (4) until the minutes
stop scrolling and the hour dis-
play starts to scroll. Momen-
tarily release when the correct
hour is displayed; then repeat-
edly press and release the Set/
Reset Button (4) until the cor-
rect minutes are displayed.
Summary of Contents for 650 H1 2010
Page 82: ...80 NOTES...
Page 91: ...89 MAINTENANCE RECORD DATE MILEAGE SERVICE PERFORMED NOTES...
Page 92: ...90 MAINTENANCE RECORD DATE MILEAGE SERVICE PERFORMED NOTES...
Page 94: ...92 NOTES...
