66
2. Press the auxiliary brake pedal
several times to check for firm-
ness.
3. If the pedal is not firm, the system
must be bled.
NOTE: Take the ATV to an autho-
rized Arctic Cat ATV dealer for this
service.
PROTECTIVE RUBBER
BOOTS
The protective boots should be
inspected periodically according to the
Maintenance Schedule.
Ball Joint Boots
(Upper and Lower/
Right and Left)
CC791
1. Secure the ATV on a support stand
to elevate the front wheels.
2. Remove both front wheels.
3. Inspect the four ball joint boots for
cracks, tears, or perforations.
4. Check the ball joint for free-play
by grasping the steering knuckle
and turning it from side to side and
up and down.
5. If boot damage is present or ball
joint free-play seems excessive,
contact an authorized Arctic Cat
ATV dealer for service.
Tie Rod Boots (Inner
and Outer/Right and
Left)
CC792
1. Secure the ATV on a support stand
to elevate the front wheels.
2. Remove both front wheels.
3. Inspect the four tie rod boots for
cracks, tears, or perforations.
4. Check the tie rod end free-play by
grasping the tie rod near the end
and attempting to move it up and
down.
5. If boot damage is present or tie rod
end free-play seems excessive,
contact an authorized Arctic Cat
ATV dealer for service.
Drive Axle Boots
CC793
Summary of Contents for 650 H1 2010
Page 82: ...80 NOTES...
Page 91: ...89 MAINTENANCE RECORD DATE MILEAGE SERVICE PERFORMED NOTES...
Page 92: ...90 MAINTENANCE RECORD DATE MILEAGE SERVICE PERFORMED NOTES...
Page 94: ...92 NOTES...
