Arctic Cat 500 Sno Pro, Operator'S/Performance Manual

Page: 83 / 95

77
Crankshaft Bearing Remover
p/n: 0144-302
Usage: Remove crankshaft bearings.
0144-302
Oil Seal Protector Tool
p/n: 0644-219
Usage: Protect the oil seal when installing the water
pump driveshaft on liquid cooled 2-stroke Arctic Cat
engines.
0644-219
Piston Pin Puller
p/n: 0644-328 (Complete Set)
p/n: 0643-073 (Extractor Nut Only-Small)
p/n: 0643-074 (Extractor Nut Only-Medium)
p/n: 0643-075 (Extractor Nut Only-Large)
p/n: 0643-072 (Threaded T-Handle)
Usage: Remove piston pins.
0644-328
Spring Tool
p/n: 0644-554
Usage: Remove/install exhaust springs.
0644-554
Spring Tool
p/n: 0644-072
Usage:
Remove/install exhaust springs.
0644-072
Stud Runner
p/n: 0644-018 (6 mm)
p/n: 0644-019 (8 mm)
p/n: 0644-020 (10 mm)
Usage: Install studs on cylinders and crankcase.
0644-020