3-25
3
DE534A
DE327
12. Install the fuel spring.
DE292
13. Using new O-rings, install the fuel rail and secure
with four Allen-head machine screws. Tighten to
36 in.-lb.
DE534B
DE405A
14. Place a small bead of high-temperature sealant on
the fuel rail seal; then carefully install the valve
cover with a new gasket and oil return boot. Using
a crisscross pattern, tighten the Allen-head cap
screws to 6.5 ft-lb; then tighten the two “tam-
per-proof” torx-head cap screws to 6.5 ft-lb.
DE406
DE405B
AT THIS POINT
If injectors were serviced, static injector timing must
be set (see Top-Side Components in this section).
Next
Back
Section
Table of Contents
Manual
Table of Contents
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com