3-53
3
Assembling Countershaft
1. Place the thrust washer on the splined end of the
countershaft; then install the low driven gear bush-
ing and bearing.
DE155A
DE158B
2. Install the low driven gear onto the bearing with
the shift dog slots directed toward the fine-splined
section of the countershaft; then secure with a
splined washer and lock washer.
DE184
3. Place a splined thrust washer onto the counter-
shaft; then install the reverse driven gear bushing
and bearing.
DE185A
4. Install the reverse driven gear onto the bearing;
then secure with a splined washer and snap ring.
NOTE: Always install snap rings with the flat
(sharp) side away from the washer.
DE186
5. Install the reverse shift dog and splined bushing
onto the shaft; then secure with a snap ring.
DE187A
6. Install the countershaft drive gear and thrust
washer.
7. Install the high/low shift dog with the raised lugs
directed toward the low driven gear.
Next
Back
Section
Table of Contents
Manual
Table of Contents
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
