8-14
Footrests
REMOVING
1. Remove the machine screws and flange nuts secur-
ing the front and rear fenders to the footwells.
CD691A
2. Remove the screws securing the foot pegs to the
footrests; then remove the foot pegs and footwells.
3. Remove the cap screws and flange nuts securing the
footrests to the frame; then remove the footrests.
CLEANING AND INSPECTING
NOTE: Whenever a part is worn excessively, cracked,
or damaged in any way, replacement is necessary.
1. Clean the footrest in parts-cleaning solvent.
2. Inspect the footrest weldments for cracks or unusual
bends.
3. Inspect all tubing for cracks or unusual bends.
INSTALLING
1. Secure the footrests to the frame with four cap
screws and two flange nuts; then tighten the 8 mm
hardware to 20 ft-lb and the 10 mm hardware to 40
ft-lb.
2. Place the footwells onto the footrests; then put the
foot pegs in position and secure with two cap screws.
3. Install the machine screws and flange nuts securing
the front and rear fenders to the footwells.
Belly Panel
REMOVING/INSTALLING
1. Remove the machine screws and shoulder washers
securing the belly panel to the underside of the
frame; then remove the belly panel.
2. Place the belly panel into position on the underside
of the frame; then install the machine screws and
shoulder washers. Tighten securely.
Exhaust System
REMOVING MUFFLER
1. Remove the two exhaust springs at the muf-
fler/exhaust pipe juncture.
CF138A
2. Slide the muffler rearward to clear the mounting lugs
and remove the muffler.
INSPECTING MUFFLER
NOTE: Whenever a part is worn excessively,
cracked, or damaged in any way, replacement is nec-
essary.
1. Inspect muffler externally for cracks, holes, and
dents.
2. Inspect the muffler internally by shaking the muffler
back and forth and listening for rattles or loose debris
inside the muffler.
NOTE: For additional details on cleaning the muf-
fler/spark arrester, see Section 2.
INSTALLING MUFFLER
1. Place the muffler into position engaging the mount-
ing lugs into the grommets; then slide the muffler
forward.
2. Install the two exhaust springs.
Rear Body Panel/Rack
REMOVING
1. Remove the cap screws and lock nuts securing the
rear rack; then remove the rear rack. Account for the
bushings.
2. Remove one shoulder screw and lock nut and three
plastic rivets (on each side) securing the rear body
panel to the footwells.
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
