3-35
3
Installing Right-Side
Components
1. Install the gear position switch making sure the two
neutral contact pins and the two springs are properly
positioned. Tighten the cap screws securely.
CD997
CD994
2. Install the secondary shaft bearing housing making
sure the two alignment pins are properly positioned.
Tighten the cap screws to 28 ft-lb.
CD999
3. Install the oil pump onto the engine; then tighten the
Phillips-head screws securely.
CD988
4. Install the oil pump drive gear spacer onto the crank
balancer shaft. Grease the pin and insert it into the
shaft; then install the drive gear making sure the
raised side of the gear is facing toward the inside.
Secure the gear with the cap screw (threads coated
with red Loctite #271) and the washer. Tighten the
cap screw to 63 ft-lb.
CD992
CD991
5. Grease the driven gear pin and insert it into the oil
pump shaft; then install the driven gear (noting the
direction of the sides of the gear from removing).
Secure with a snap ring.
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
