3-8
CD788
23. Remove the spark plug wire from the spark plug;
then remove the coil from the frame.
CD814
24. Remove the cap screw securing the engine ground
wire to the engine.
KC201A
25. Remove the engine mounting through-bolts. Account
for all mounting hardware.
CD809
26. Raise the rear of the engine enough to allow the rear
output flange to clear the output flange joint. Block
the engine up in this position.
CD811
27. Remove the first small boot clamp; then remove the
output flange and driveshaft from the rear drive cou-
pler.
CD812A
CD813
28. Remove the block from under the engine and lower
the engine; then remove the boot clamp from the
front output drive yoke.
29. Move the engine to the rear enough to allow the front
driveshaft to clear the front output yoke; then move
the engine forward and to the left. The engine will
come out the left side of the frame.
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
