arcelik Beko B13, Service Handbook

Page: 8 / 111

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
8

Check the power cord and plug of the serviced product. If its power cord or plug is
faulty, replace the power cord group completely with a new group. Please make
sure that the cables are not shortened, snapped, stripped, hardened and plug
ends are not broken, cracked, oxidized or loosened.

Check the outlet which the serviced product is plugged in. Product should not be
plugged in the outlets which are loosened, dislocated from its housing, broken, in
contact with water, dusty, dirty, oiled.

Along the route of the power cord from the outlet to the machine, make sure that
the cord does not come under heating sources, cupboards, devices, etc. which
may damage the product.

During service, do not perform hot works on the machine, such as soldering,
welding, etc. Do not leave these devices on the machine.

During service, do not wipe the machine with flammable and combustible
substances such as thinner, alcohol, etc.

After the machine is serviced, do not forget any paper-based materials inside the
machine such as service slip, brochure, etc.
IMPORTANT:
When the machine is required to be serviced by being tilted to the front, its transport
safety bolts should be installed.
This is required for the front components of the machine not to be damaged.