arcelik Beko B13, Service Handbook

Page: 36 / 111

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
36
In order to clean the soiled filter and drain the water:
1. Unplug the machine and disconnect the power.
WARNING: Temperature of the water inside the machine may rise up to 90
ºC. In
order to avoid the burning risk, filter should be cleaned after the water inside the
machine is cooled down.
2. Open the filter cover.
Figure 6.4 Cleaning the filter - 1
3. Some of our products have emergency draining hose and some do not have.
Follow the steps below to discharge the water.
Discharging the water when the product has an emergency draining hose:
Figure 6.6 Cleaning the pump - 2
a. Pull away the emergency water draining hose from its housing.
b. Put the larger end of the hose into a large vessel. Pull and remove the plug at the
end of the hose and drain the water into a vessel. When the vessel is full, shut the
nozzle of the hose by inserting the plug into it. After you empty the vessel, repeat
above procedures and drain the water inside the machine fully.
c. When the water drainage is complete, block its nozzle again with the plug and
secure the hose into its place.