arcelik Beko B13, Service Handbook

Page: 103 / 111

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
103
14. Products with built-in Draining Siphon Shut-off System
Siphon with the VDE QUALITY Label products Use of shut-off system
Siphon with the VDE QUALITY Label products
Use of shut-off system
Siphon cutting system gets clogged occasionally in time due to laundry lint. System
does not serve its siphon cutting function in this case. However, this situation will not
create or lead to another functional problem in the machine.
If any problem of siphoning in draining is observed, siphon, siphon cutting
intermediate hose will be removed from the siphon bracket and drum and the wastes
inside the hose and siphon bracket nozzle will be cleaned and the hose will be re-
installed in the same position (to be be touched to the body and the rear wall).
In all of our products on site, there is risk of siphoning due to the negative draining
conditions. Said system is a solution intended to prevent this problem and obtain the
VDE Quality Label license.
Lower detail of the drain group which includes into the siphon cutting system is as
follows. System consists of a two-part draining hose as
“External draining hose
group” and “draining hose group”.
Siphon support intermediate
hose
Siphon bracket
Draining hose coming out of the draining pump is
connected to the siphon bracket under the parasite
filter.
Siphon shut-off intermediate hose comes out from
the siphon support and connected to a surface
which is drilled behind the drum.
Siphon shut-off intermediate hose bypasses
between drum and the draining hose and opens the
drain to atmosphere and prevents siphoning during
draining (drain's not getting air flow, falling of the
drain hose on the ground and its coming under the
level of the pump level, etc.).