arcelik Beko B13, Service Handbook

Page: 14 / 111

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
14
Figure 4.10
3.
Tighten all lock nuts by hand again.
Figure 4.11
WARNING:
Do not use any appliance or tool to loose the lock nuts.
Otherwise, they may be damaged.
4.7. Electrical connection
Plug the product into a grounded outlet protected by a 16-ampere fuse. If the
machine is used without grounding which conform to the local regulations, our
company will not be liable for any damages which may arise.

Connection should comply with the national regulations.

Power cable's plug should be easily accessible after installation.

If the current value of your fuse is below 16 amperes, make a qualified electrician
connect a 16-ampere fuse.

Voltage specified in the “Technical specifications” section should match the mains
voltage.

Do not connect to the extension cables or multiple outlets.
WARNING: Damaged power cables should be replaced by the
Authorized Service.
4.8. Transportation of the product
1.
Before transporting the product, unplug it from the mains.
2. Remove the connections of water drain and water mains.
3. Discharge the entire amount of water left inside the product.
4. Install the transport safety bolts in reverse order of the disassembly procedure.