arcelik Beko B13, Service Handbook

Page: 34 / 111

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
34
2. Wash the dispenser and the siphon in the lavatory with an ample amount of
lukewarm water. In order to prevent the residues to contact your skin, clean it with
an appropriate brush by wearing a pair of gloves.
3. After the cleaning, replace the dispenser in order to make sure that the siphon is
seated into its place well .
6.2. Cleaning the Loading Door and the Drum
Softener, detergent and dirt residues may accumulate in your machine in the course
of the time and lead to complaints of odor and bad wash results. To prevent this, use
Drum Cleaning program. If your machine does not have Drum Cleaning program,
use the Cottons-90 program by selecting the Extra Water or Extra Rinse auxiliary
function. Run these processes definitely without any laundry and when the machine
is empty. Before starting the program, put one teaspoon (max. 100 g) powder
descaling agent into the main wash detergent compartment (number 2). If the
descaling agent is a tablet, put one tablet into the compartment number 2. After the
program finishes, wipe dry the inside of the bellows with clean cloth.
Repeat the drum cleaning work at every 2 months.
Use a descaling agent which is appropriate for the washing machines.
Make sure that there is not any foreign bodies left inside the drum after each wash.
Figure 6.2 Cleaning the bellows
If the holes in the bellows shown in the Figure are clogged, open the holes by means
of a toothpick.
Rust stains may form inside the drum due to the metal objects. Clean the stains on
the surface of the boiler with stainless steel cleaning agents. Never use steel wool or
wire wool.
WARNING: Never use sponge or scrub materials. These will damage the painted and
plastic surfaces.
6.3. Cleaning the body and control panel
Wipe the body of the machine with soapy water or non-corrosive mild gel detergents
as necessary, and dry with a soft cloth.