arcelik Beko B13, Service Handbook

Page: 12 / 111

B13 B7S B7SLED WASHING MACHINE SERVICE HAND BOOK
12
WARNING: Make sure that the hot and cold water taps are
connected correctly when the product is being installed. Your laundry
may come out hot at the end of the washing cycle and wear out.
Figure 4.6
3. When hose connection is completed, check whether there is leak problems at
the connection points by opening the taps fully. In case of any leakage, close
the tap and remove the nut. Check the seal and tighten the nut again carefully.
In order to prevent the water leaks and resultant damages, keep the taps
closed when you do not use the product.
4.5. Connection to the water drain

End of the drain hose should be attached directly to waste water drain, lavatory or
bathtub.
WARNING: If the hose is dislocated during water draining, it will flood
your house. Also, there is risk of burning by hot water due to washing at
high temperatures. In order to prevent such situations and make sure
that the machine performs water intake and discharge processes
without any problem, fix the drain hose securely.

The hose should be attached to a height of at least 40 cm, and 100 cm at most.
Figure 4.7
2. Tighten the nuts of the
hose by hand. Never
use a tool when
tightening the nuts.