Flex EPV Instruction Manual (CE)
April 2020 v1.0
Page 38 of 71
4.2.4 Function Relay Outputs
Listed below are other types of functions that can be outputted through the three Function output
relays (K25, K26 and K30). Refer to section 4.2.6.6 ~ 4.2.6.8 function relay programming.
---
:
START function only.
LV
:
Function relay closes when receiver voltage is low.
ID
:
Function relay works simultaneously with all motion commands.
NORMAL :
START fu AUX with normal momentary output.
TOGGLE :
START fu AUX with toggled/latching output.
TOG&E :
START fu AUX with toggled/latching output. The relay opens
when STOP button is pressed down and transmitter power off.
S/P
:
FUNCTION relay closes when START command is executed and opens
only when transmitter power is turned off.
EXT
:
FUNCTION relay works simultaneously with the receiver MAIN relays.
TDM A+B :
FUNCTION relay closes when selector switch is rotated to the A+B
position and opens when rotate to A or B positions (tandem monitoring
output).
HORN
:
FUNCTION relay closes for up to 3 seconds when START command is
initiated at transmitter power on and then becomes normal momentary
outputs thereafter.
G SENSOR :
FUNCTION relay closes when Zero-G sensor is triggered (receiver
MAIN relays deactivated) and opens when receiver MAIN relays are
reactivated.
TANDEM C :
FUNCTION relay closes when tandem receiver C is selected or activated.
RESET
:
FUNCTION relay closes when rotate to START position and opens
when let go. Works during initial transmitter startup and inactivity
timer START reset.
SW8 ABC
:
FUNCTION relay closes at C position (for pushbutton and rotary select ABC
function).
SW12 ABC :
FUNCTION relay closes at C position (for pushbutton and rotary select ABC
function).
4.2.5 Brake Functions
Listed below are types of brake functions with various 1
st
and 2
nd
speed relay actions. Refer to
section 4.2.6.9 brake function programming. For 2-step/speed pushbuttons only.
DEMAG-1 :
When releasing pushbutton from 2
nd
speed up to 1
st
speed, the 1
st
speed output relay will open for up to 1.0 second and then closes again.
DEMAG-2 :
When pushbutton is pressed down to 2
nd
speed directly from 0 speed,
the 1
st
speed output relay will maintain closure for up to 0.4 second
before 2
nd
speed output relay closes. When pushbutton is released from
2
nd
speed up to 0 speed, the 1
st
speed output relay will maintain closure
for up to 0.5 second before going to 0 speed.
DEMAG-3 :
When releasing pushbutton from 2
nd
speed up to 1
st
speed, both 1
st
and
2
nd
speed output relays are opened. Release pushbutton to 0 speed and
then press down to 1
st
speed to reengage the 1
st
speed output relay.
P&H
:
When releasing pushbutton from 2
nd
speed up to 0 speed, the 1
st
speed
output relay will maintain closure for up to 0.1 second before going to 0
speed.
