30
Exit the function
or data change
Confirm access
or data change
Scroll
(LEFT /
RIGHT)
Delete
selected
character
Data
decrease
of data
Scroll
(UP /
DOWN)
Enter
selected
character
Par.
11.4.8 Rev counter
• Status
To configure the items on this menu, you must enable the rev counter
(
Rev counter enabled /
Rev counter disabled).
Enter the values for the rev counter installed on the system.
• Constant:
Indicate the constant of the installed rev counter.
• Minimum rotation speed
• Maximum rotation speed
Enable the proper menu item
Alarms
(par. 11.4.10) if you want the computer to trigger an alarm when, during spraying, the measured RPM are
outside the set range. For minimum speed, the control is active only when the spraying is active (main switch ON).
11.4.9 Tank
Allows setting the tank values.
The settings will change according to the selected source for tank level reading (basic settings, chap. 10).
TANK LEVEL SOURCE: MANUAL / FILLING FLOWMETER
• Reserve level
Indicate range value. The tank alarm is triggered when, during spraying, the tank level falls below the set value.
• Capacity
Indicate tank capacity.
TANK LEVEL SOURCE: LEVEL SENSOR
• Reserve level
Indicate range value. The tank alarm is triggered when, during spraying, the tank level falls below the set value.
• Tank profile
The tank profiles can be loaded or saved on the internal memory so as to reconfigure the computer if necessary, solve problems or configure
another tank without repeating all operations manually.
In this menu, select the tank profile to be used.
The profiles are ONLY available if copied onto the internal memory (par. 14.4.4), or after calibrating the tank profile (par. 11.4.12).
After loading a tank profile it is NECESSARY to perform a zero calibration of the level sensor (
Tank level zero value
, par. 11.4.12).
ADVANCED SETTINGS
"IMPLEMENT"
